Anscare BN4 Disposable Nitrile Exam Gloves
AnsCare Level 4 Nitrile Exam Gloves meet or exceed requirements for ASTM D6319 (2019) (Standard Specification for Nitrile Examination Gloves for Medical Application).
All AnsCare gloves are inspected and packaged at our Albuquerque, New Mexico USA location using 100% post-consumer packaging.
Anscare BN4 Gloves
Key Features
- Meets or exceeds D6319-19
- Excellent antiviral properties
- Skin irritation and sensitization tested
- Superior strength, puncture-resistant
- Medical grade
- Latex-free
- Powder-free
- Ambidextrous
- Textured fingertips
- Single use
- Non-sterile
Intended Use
- Intended to be worn on the examiner’s hand to prevent contamination between patient and examiner. Single-use / non-sterile.
Precautions
- Gloves should not be reprocessed or reused—intended for single use only.
- Trim fingernails and remove rings to avoid cutting or scratching the gloves.
- If the gloves are compromised during examination, thoroughly wash your hands and change gloves.
- This product should not be used in contact with harsh chemicals, acid or sand.
- If you have an allergic reaction, discontinue use and consult a physician.
- Store in a well-ventilated, cool, dry place. Avoid heat in excess of 104°F (40°C).
- Keep open box out of direct sunlight, and avoid prolonged exposure to direct florescent light.
- Use before expiration date.
- Properly dispose of used gloves per local medical waste management regulations.
Standards and Certifications
- FDA 510K, K211220
- ASTM D6319
Manufacturing Accreditations
ISO/IEC 17025 State Accredited Laboratory
ISO 9001 Quality Management System Certification
ISO 13485 Medical Device Quality Management System
QS$820 FDA Quality System Requirements
ISO 14001 Environmental Management System
Regulatory Compliance
- 21 U.S. C. ch.9 EU 2016/425
- EU 2017/745 EC 10/011
- REACH EC 1935/2004
Specifications
- Composition: 100% Nitrile, sulfur, pigments
- Grade: Medical grade
- Color: Blue
- Cuff length: Standard
- Glove length: 240 mm / 9.5 in (minimum)
- Freedom from holes: 1.5 AQL (Inspection level I)
- Palm thickness: 0.08±0.02 mm / 3.2±0.8 mil
- Finger thickness: 0.12±0.02 mm / 4.8±0.8 mil
- Tensile strength: ≥14 Mpa
- Elongation: ≤500%
- Application temperature: ≥104°F / ≥40° C
Packaging Options
- Box: 100 gloves (by weight) masks
- Case of boxes: 10 boxes (1,000 pieces)
- Pallet of boxes: 40 cases (40,000 pieces)
Sizes
- BN4 001: XS
- BN4 002: S
- BN4 003: M
- BN4 004: L
- BN4 005: XL
- BN4 006: XXL
Storage and Transportation Conditions
- Do not store above 104°F (40°C).
- Store in a well-ventilated room without exposure to corrosive gas.
- Protect from fire, rat and insect contact.
- During transport, avoid exposure to moisture, light and heat.
- Shelf life: 3 years.