AnsCare BL3 Masks
Blue 3-ply procedural masks with comfort ear loops. Highest level barrier (160 mmHg). Designed to resist a splash or spray during tasks like orthopedic surgery or trauma.
AnsCare Level 3 procedural masks are manufactured by ANS-PAK in the USA under exacting quality control standards. The mask construction features custom-designed elastic ear loops to provide all-day comfort and prevent ear fatigue, and a flexible coated metal nose bridge which can be adjusted to provide a close, gap-free fit. The 3-ply material provides protection which exceeds ASTM Level 3 (F2100-19) requirements. Available in blue.
ANSCARE LEVEL 3 FACE MASK DETAILS
Intended Usage
Filtration of respiratory droplets, dust, pollen, bacteria and particulate matter. Single use only.
Key Features
- MADE IN THE USA
- 100% post consumer packaging
- Extra-comfort ear loops
- 3-ply pleated construction
- Adjustable nosepiece
- Meets or exceeds ASTM Level 3 requirements for PFD (Partical Filtration Efficiency)
- Meets or exceeds ASTM Level 3 requirements for BFE (Bacterial Filtration Efficiency)
- Meets or exceeds ASTM Level 3 requirements for Differential Pressure (Breathability)
- Meets or exceeds ASTM Level 3 requirements for Flammability Resistance
- Latex-free
- Single use
- Non-sterile
Mask Construction
AnsCare Procedural Masks feature three-layer construction:
- Outer layer: 25 GSM hydrophobic non-woven PP spunbond
- Middle layer: 27 GSM BRE >95% non-woven PP meltblown
- Inner layer: 25 GSM soft absorbent non-woven PP spunbond
Comfort ear loops are soft, lightweight 3mm elastic. Nose bridge is 3mm PP coated flexible forming metal.
Packaging Options
- Box: 50 masks
- Case of boxes: 40 boxes (2,000 pieces)
- Pallet of boxes: 30 cases (60,000 pieces)
- Plastic bags: 10 masks per bag
- Case of bags: 40 bags of 10 (400 pieces) 4.9 lb. [dimensions: 20"x16"x5"]
- Pallet of bags: 108cs, 6TIx18
Certifications and Registrations
- BFE (Bacterial Filtration Efficiency): ≥ 98%. Test performed to determine the filtration efficiency of test articles by comparing the bacterial control counts upstream of the test article to the bacterial counts downstream.
- PFE (Particle Filtration Efficiency): ≥ 98%. Test performed to evaluate the non-viable particle filtration efficiency (PFE) of the test article.
- Differential Pressure (Breathability): < 6.0 mmH2O/cm2. The Delta P test is performed to determine the breathability of test articles by measuring the differential air pressure on either side of the test article using a manometer, at a constant flow rate.
- Flammability: Burn time ≥ 3.5 seconds. Test performed to evaluate the flammability of plain surface clothing textiles by measuring the ease of ignition and the speed of flame spread.
- Synthetic Blood Penetration Resistance: Passed 160 mmHg requirements. Test performed to evaluate surgical facemasks and other types of protective clothing materials designed to protect against fluid penetration.
Storage and Transportation Conditions
- Transport and store in a dry and well-ventilated area.
- Prevent exposure to direct sunlight, rain, fire, corrosive gas, and rat/insect contact.
- Do not store in conditions with relative humidity over 80%.
- Shelf life: 2 years.